Spec Sheet


increments up to 2 days. Selectable rinsing lengths from 10 to 180 seconds. Factory set off. Approvals: t CSA certified t Complies to ASME A112.18.1/C...

3 downloads 7 Views 421KB Size

Electronic Proximity™ Sensing Technology Lavatory Faucets

L

SPECIFICATION: (example) t%FDL mount electronic lavatory faucet t"MM metal spout construction tProximity™ Sensing Technology t)BSEXJSF units supplied with 24 7"$ to 6 7%$ converter (Transformer required). (Specify separately) t#BUUFSZ units supplied with i""w cell batteries t4VSGBDF mount control box t Mixing valve required (Order separately) t Vandal resistant 0.5 gpm (1.9 L/min) flow control non-aerating spray outlet

590-P SERIES ELECTRONIC DECK MOUNT LAVATORY FAUCET FRONT VIEW

590-P SERIES TYPICAL INSTALLATION

56 mm (2.22")

590-P Series t$FOUFSNPVOU TJOHMFIPMFJOTUBMMBUJPO 590-PLGHDF (Battery) 590-PLGHDFHW (Hardwire) 590-PLGHDFHW-BB (Hardwire with Battery Backup)

32 mm (1.25") Dia. Hole Required

OPERATION: t)BOETGSFF UPVDIMFTT PQFSBUJPO t/PWJTJCMFTFOTPr, the spout is the sensor. t8BUFSýPXTXIFOTFOTJOHJTBDUJWBUFE t8BUFSýPXTUPQTVQPOEFBDUJWBUJPOPGTFOTJOH t"EKVTUBCMFTFOTJOHEJTUBODFGBDUPry set to 76 mm (3"). t Low battery audible beep (for battery models only) will activate after faucet shuts off when approximately 1500 cycles remain. t"EKVTUBCMFBVUPTIVUPGGGFBUVSF'BDUPSZTFUUP 45 seconds. t.FUFSJOHNPEFXJUITFMFDUBCMFýPXUJNFTPG 7 seconds to 4 minutes, factory set off. t1FSJPEJD3JOTFGFBUVSF UJNFBEKVTUBCMFJOIPVS increments up to 2 days. Selectable rinsing lengths from 10 to 180 seconds. Factory set off.

3/8" $PNQSFTTJPO $POOFDUJPO 330 mm (13.0") ."9

3/8" $PNQSFTTJPO $POOFDUJPO

SIDE VIEW

109 mm (4.3")

135 mm (5.3")

178 mm (7.0") ."9 3/8" $PNQSFTTJPO $POOFDUJPO

82 mm (3.2")

508 mm (20.0") Dia. Braided Polymer Hose

56 mm (2.2")

NOTE: For optimum performance of this product,we recommend a system pressure between 20 and 80 PSI static. This product will operate up to a maximum of 125 PSI static per ANSI and CSA requirements. However, we do not recommend pressures above 80 PSI. Thermal expansion or leaking pressure reducing valves may require use of expansion tanks or relief valves to ensure your system never exceeds its maximum intended pressure setting.

156 mm (6.1")

50 mm (2.0") Max Deck Thickness

Sensor Wire

FLOW RATE vs PRESSURE FLOW (L/min)

VANDAL PROOF SURFACE MOUNT HOUSING

FLOW (GPM)

Outlet Flow Rates

2.5

Battery Operated box shown. Hardwire Version comes complete with Watertight $POOFDUPSBOE)BSEXJSF$POWFSUFS7"$UP7%$ Hardwire with Battery Backup (-BB) DPNFTDPNQMFUFXJUI8BUFSUJHIU$POOFDUPS )BSEXJSF$POWFSUFS7"$UP7%$BOE7CBUUFSZ See DSP-BB for detailed specification GPVOEJOUIFi"EE0O0QUJPOwTFDUJPOXIFO using the printed spec binder).

9 8

2

7 6

1.5

5 4

1

3 .5

2 1 0

0

10

20

30

40

50

60

70

80

0

139 mm (5.47")

36 mm (1.43") 3/8" $PNQSFTTJPO $POOFDUJPO Outlet

Line Pressure (psig)

Approvals: t$4"DFSUJåFE t$PNQMJFTUP"4.&"$4"# t*OEJDBUFT"%"DPNQMJBODFUP *$$"/4*""%" t7FSJåFEDPNQMJBOUXJUIXFJHIUFE average Pb content regulations

($POUBDU%FMUB3FQSFTFOUBUJWFGPS4UBUFBOEPS -PDBM"QQSPWBMT

U.S. Patent #6, 826, 455.

146 mm (5.73")

89 mm (3.5") ."9 ®

Recommended 381 mm (15" max.) to top of counter

101 mm (3.96")

1/8" "MMFO Screw

Note: Measurements may vary ± 6mm (0.25")

Batteries included on all battery models. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.

DSP–590-PHDF Rev. D

Battery Pack Inlet 3/8" NPT or 3/8" $PNQSFTTJPO "EBQUPS (Supplied)

Flow Rates are at 60 PSI. Note: Use this page as a product submittal sheet. Refer to www.specselect.com for individual models.

Page 4.C.81

Electronic Proximity™ Sensing Technology Lavatory Faucets

L SPECIFICATION: (example) tDeck mount electronic lavatory faucet t"MM metal spout construction tProximity™ Sensing Technology tHardwire units supplied with 24 7"$ to 6 7%$ converter (Transformer required). (Specify separately) tBattery units supplied with 4 “""w cell batteries tSurface mount control box tMixing valve required (Order separately) tVandal resistant 0.5 gpm (1.9 L/min) flow control non-aerating spray outlet 591-P Series 4" (102mm) centers – 7.5" (191mm), Forged coverplate with anti-rotation pin 591-PLGHDF (Battery) 591-PLGHDFHW (Hardwire) 591-PLGHDFHW-BB (Hardwire with Battery Backup) 592-P Series 8" (203mm) centers – 11.1" (282mm), Forged coverplate with anti-rotation pin 592-PLGHDF (Battery) 592-PLGHDFHW (Hardwire) 592-PLGHDFHW-BB (Hardwire with Battery Backup)

OPERATION: t)BOETGSFF UPVDIMFTT PQFSBUJPO t/PWJTJCMFTFOTPr, the spout is the sensor. t8BUFSýPXTXIFOTFOTJOHJTBDUJWBUFE t8BUFSýPXTUPQTVQPOEFBDUJWBUJPOPGTFOTJOH t"EKVTUBCMFTFOTJOHEJTUBODFGBDUPry set to 76 mm (3"). t Low battery audible beep (for battery models only) will activate after faucet shuts off when approximately 1500 cycles remain. t"EKVTUBCMFBVUPTIVUPGGGFBUVSF'BDUPSZTFUUP seconds. t.FUFSJOHNPEFXJUITFMFDUBCMFýPXUJNFTPGTFDPOET to 4 minutes, factory set off. t1FSJPEJD3JOTFGFBUVSF UJNFBEKVTUBCMFJOIPVS increments up to 2 days. Selectable rinsing lengths from 10 to 180 seconds. Factory set off. NOTE: For optimum performance of this product,we recommend a system pressure between 20 and 80 PSI static. This product will operate up to a maximum of 125 PSI static per ANSI and CSA requirements. However, we do not recommend pressures above 80 PSI. Thermal expansion or leaking pressure reducing valves may require use of expansion tanks or relief valves to ensure your system never exceeds its maximum intended pressure setting.

591-P & 592-P SERIES ELECTRONIC DECKMOUNT LAVATORY FAUCET

TYPICAL INSTALLATION 56 mm (2.22")

50 mm (2.0") Max Deck Thickness

2

7 6

1.5

5 4

1

3 2

.5

1 0

0

0

10

20

30

40

50

60

70

80

3/8" $PNQSFTTJPO $POOFDUJPO

330 mm (13.0") ."9

SIDE VIEW

178 mm (7.0") ."9 3/8" $PNQSFTTJPO $POOFDUJPO

125 mm (4.9")

134 mm (5.3")

98 mm (3.9")

508 mm (20.0") Dia. Braided Polymer Hose

63 mm (2.5")

Sensor Wire

139 mm (5.5")

50 mm (2.0") Max Deck Thickness

Battery Operated box shown. Hardwire Version comes complete with Watertight $POOFDUPSBOE)BSEXJSF$POWFSUFS7"$UP7%$ Hardwire with Battery Backup (-BB) DPNFTDPNQMFUFXJUI8BUFSUJHIU$POOFDUPS )BSEXJSF$POWFSUFS7"$UP7%$BOE7CBUUFSZ See DSP-BB for detailed specification GPVOEJOUIFi"EE0O0QUJPOwTFDUJPOXIFO using the printed spec binder).

2.5 9 8

32 mm (1.25") Dia. 3 Holes required

VANDAL PROOF SURFACE MOUNT HOUSING

FLOW (GPM)

Outlet Flow Rates

4" $07&31-"5& 191 mm (7.5") 8" $07&31-"5& 282 mm (11.1")

4" $07&31-"5& 102 mm (4.0") 8" $07&31-"5& 203 mm (8.0")

FLOW RATE vs PRESSURE FLOW (L/min)

591-P & 592-P SERIES

FRONT VIEW

139 mm (5.47")

36 mm (1.43")

3/8" $PNQSFTTJPO $POOFDUJPO Outlet

Line Pressure (psig)

Approvals: 146 mm (5.73")

t$4"DFSUJåFE t$PNQMJFTUP"4.&"$4"# t*OEJDBUFT"%"DPNQMJBODFUP *$$"/4*""%" t7FSJåFEDPNQMJBOUXJUIXFJHIUFE average Pb content regulations

($POUBDU%FMUB3FQSFTFOUBUJWFGPS4UBUFBOEPS -PDBM"QQSPWBMT

U.S. Patent #6, 826, 455.

Batteries included on all battery models. Note: Use this page as a product submittal sheet. Refer to www.specselect.com for individual models.

Page 4.C.82

89 mm (3.5") ."9

®

Recommended 381 mm (15" max.) to top of counter

101 mm (3.96")

1/8" "MMFO Screw

Note: Measurements may vary ± 6mm (0.25")

Battery Pack Inlet 3/8" NPT or 3/8" $PNQSFTTJPO "EBQUPS (Supplied)

Flow Rates are at 60 PSI. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.

DSP–590-PHDF Rev. D