Standard Connectors

---

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

NEW

Standard Connectors MD Series ■Overview Connectors conforming to the requirements of the High Definition Multimedia Interface (HDMI) Standard intended for the digital television. The HDMI places the video and audio links into a single connector /cable.

■Features

1.6 mm offset from the mating surface

1. Two panel mounting styles (receptacle) ¡SMT termination, through panel (no screw) ¡SMT termination, through panel, single screw panel attachment

2. Easy insertion Mating interface is visible on the panel surface, allowing correct insertion of the plug. (Figures (1) and (2))

3. Reliable connection Fully mated condition between the plug and receptacle is confirmed with a distinctive tactile “click” sensation, assuring complete mechanical and electrical connection.

4. Small size Despite it’s small size, solder connection of the wires to the terminations is easily performed.

5. Strong shields Two-piece shields surrounding the wire termination areas provide EMI protection as well as increase the strength of the plug. (Figure (3))

1.6mm Figure (1)

Easy insertion - connector flush with the panel

6. RoHS compliant All components and materials comply with the requirements of EU Directive 2002/95/EC

Panel

Panel mounting screw

Receptacle

Plug

■Applications PDP, LCD, CRT televisions, projectors, DVD, set top boxes and other audiovisual peripheral equipment.

PCB

Mating surface

Figure (2)

Strong shields-plug HDMI connections

Shell – top

Assembly (insulator/ contacts)

Figure (3)

Shell - bottom

*High Definition Multimedia Interface and HDMI are trademarks of HDMI Licensing, LLC.

2008.3

1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will beConnectors discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MD Series●HDMI™ Standard

■Specifications Current rating

0.5A

Voltage rating

125V AC

Operating temperature range : -55°C to +85°C

Ratings

Item 1. Contact resistance

Specification

Conditions

Signal: 60 mø max. Shell: 30 mø max.

100mA (DC or 1,000Hz)

2. Insulation resistance

100 Mø min.

500V DC

3. Withstanding voltage

No flashover or insulation breakdown

500 V AC / 1 minute

4. Durability 5. Vibration 6. Shock

7. Temperature cycle 8. Salt spray

Contact resistance of contacts: Change of 30mø max. Contact resistance of shell: Change of 50mø max.

10,000 cycles

Frequency: 55 to 2,000 Hz, total amplitude of 1.5 mm Acceleration of 147 m/s2, 12 test cycles in each of the 3 directions

No electrical discontinuity of 1 µs or longer. Contact resistance, contacts: Change of 30 mø max. Contact resistance, shell: Change of 50 mø max. No damage, cracks, or parts dislocation

Acceleration of 490m/s2, 11 ms continuous time, sine half-wave, 3 test cycles in each of the 3 directions

Contact resistance, contacts: Change of 30 mø max. Contact resistance, shell: Change of 50 mø max. No damage, cracks, or parts dislocation

Temperature:-55ç/+15ç to 35ç/+85ç/+15ç to 35ç Times: 30 min./ 2 min.to 3 min. / 30 min./ 2 min. to 3 min 10 cycles

No corrosion

5% salt water solution / 48 hours

■Materials / Finishes ●Receptacles Part

Material

Finish

Remarks

Insulator

LCP

-------

UL94V-0

Contacts

Copper alloy

Contact area: Gold plating over nickel Lead area: Gold flash plating over nickel

-------

Shell

Copper alloy

Tin plating over nickel

-------

-------

●Plugs

2

Part

Material

Finish

Remarks

Insulator

LCP

-------

UL94V-0

Contacts

Copper alloy

Contact area: Gold plating over nickel Lead area: Gold flash plating over nickel

-------

Shell

Copper alloy

Tin plating over nickel

-------

-------

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MD Series●HDMI™ Standard Connectors

■Ordering information ●Receptacles

Receptacles

MD 60 - 19 P A 1

2

3

4

5

: MD 1 Series name 2 Board mounting style: 60

3 Number of Contacts 4 Contact type P

:Right angle SMT :19 : Male

5 Panel mounting style Blank A

●Plugs

Plugs

MD 40 - 19 S 1

:Standard :Single panel screw

2

3

4

1 Series name 2 Termination style 40

3 Number of Contacts 4 Contact type S

: MD : Solder :19 :Female

Note: Plug cable termination and overmold recommendations are available upon request. Contact your Hirose sales representative for details. *Information contained in this catalog may not reflect latest updates. Request drawing for a specific part number listed.

3

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales represent MD Series●HDMI™ Standard Connectors

■Receptacles

17.6

●Receptacles – Right angle

9 P=0.5

(0.18)

No.1

1.4

1.4

No.19

17.2 No.19

243-0001-8

YES

6.15

No.18

8.1

1

Note 1: Tape and reel packaging (750 pieces/reel). Order by number of reels. 9

2

PCB edge

8.1

1.3

3.375

0.35 ± 0.05 Solder pad 2

0.5 1.7 1.9

M

1.1

10.6 13

(3.1)

BRecommended PCB mounting pattern

4.5 6.15

8

-R

5 0.

AX

2-Ø

PCB mounting surface

(5.6)

All dimensions: mm

BRecommended Panel Cutout 15.6

3.7 2.4

No.2 0.9

MD60-19P

10.8

5.6

RoHS

3.7 2.4

CL No.

No.1

A

(3.375)

Part Number

15

13.4 18.2

Panel thickness: 1.6 mm max.

●Receptacles – Single panel screw

All dimensions: mm

17.6 9

No.19

No.1

P=0.5

1.4

1.4

(0.18)

10.8

17.2 1.6

CL No.

RoHS

MD60-19PA

243-0003-3

YES

Tray packaging

7.9

No.19

No.1

6

15

6.15

Part Number

9.8 (3.375) (6.425)

Note.1

A

No.18

Ø1

No.2

3.7 2.4

0.9

8.1

(5.6)

(3.1)

Note 1: Use M3x12mm long pan head self-taping screw.

(3.375)

13

0.35 ± 0.05 Solder pad

5.6

2

3.7 2.4

2

0.5

8.1 10.6

1.3

PCB mounting surface

8

.5

4.5 6.15

15.6

0 -R

9

AX 1.7 1.9

6

Ø3.

M

BRecommended PCB mounting pattern

1.1 2-Ø

9.8 6.425

BRecommended Panel Cutout

PCB edge

13.4 18.2

Panel thickness: 1.6 mm max.

All dimensions: mm

4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales represent MD Series●HDMI™ Standard Connectors

■Plug

Assembly (insulator / contacts)

13.45

3.5 4.5

Shell - bottom

Assembly (insulator/contacts)

Shell - top

13.2

No.19

Part Number

CL No.

RoHS

MD40-19S

CL243-0002-0

YES

3.8

0.8

No.1

No.2

No.18

All dimensions: mm

* Supplied separate as shown.

Shell - top

Shell- bottom

Note: Plug cable termination and overmold recommendations are available upon request. Contact your Hirose sales representative for details.

5

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will beConnectors discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MD Series●HDMI™ Standard

■Packaging Specifications

●Embossed carrier tape dimensions

●Reel Dimensions (2)

(32.4)

(Ø380)

32±0.3

Unreeling direction

16±0.1

Unreeling direction

Temperature(ç)

■Recommended Temperature Profile PEAK: 250ç 230ç

250 200 150

180ç 150ç

100 50

120±30s Preheating

20±10s Soldering

Time(Seconds)

Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals.

®

6

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com

The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.