THERMALLY CONDUCTIVE PHASE CHANGE MATERIAL TCPC-3,0-LxWxT-XXX-Z
mtc’s phase change material is a wax-based thermal interface material. It has a softening temperature of 45 to 55°C. The liquid phase of the material can fill interface irregularities with much higher efficiency than traditional gap fillers. Thus an optimal heat transfer resistance is ensured. On the other hand phase change material is solid at room temperature and can be handled easily during assembly.
Features Thermal conductivity: 3,0 W/m*K
Available in thicknesses from 0,1 to 0,5 mm Available in 400x300 mm standard sheet size; other dimensions and die-cut parts on request Customized parts available Easy to assemble Electrically isolating
Property
Value
Unit
Tolerance
Test method
Base material
Filled EPDM
-
-
-
Thermal conductivity
W/m*K K*in²/W @ 50psi K*cm²/W @ 50 psi Ω*cm
-
ASTM D5470
-
ASTM D5470
Volume resistivity
3,0 0,02 0,12 1013
-
ASTM D257
Phase change temperature
45 – 55
°C
-
-
Temperature range
-25 – 125
°C
-
-
Thickness range (T)
0,1 – 0,5
mm
± 0,03
ASTM D374
Standard sheet size (LxW)
400x300
mm
-
-
Dielectric constant
3,1
MHz
-
ASTM D150
Density
2,7
g/cm³
-
-
Colour
Grey/yellow/pink
-
-
Visual
Shelf life°
12
Months
-
-
Thermal impedance
°From date of receipt by the customer when stored at 23°C / 60%rH
Modifications and errors excepted
March 2015
Micro Tech Components GmbH ● Hausener Straße 9 ● D-89407 Dillingen Phone: +49 9071 7945-0 ● Fax: +49 9071 7945-20 ● www.mtc.de ●
[email protected]
Page 1
THERMALLY CONDUCTIVE PHASE CHANGE MATERIAL TCPC-3,0-LxWxT-XXX-Z
BUILDING AN ITEM NUMBER
TCPC-3,0-LxWxT-XXX-Z
Standard options Thermally Conductive Phase Change Material Thermal conductivity
G
Grey
Y
Yellow
P
Pink
DST
Die-cut parts
KCT
Kiss-cut parts
xxx
Thickness (in mm)
xxx
Width (in mm)
xxx
Length (in mm)
Example: TCPC-3,0-25x20x0,5-DST-Y Thermally conductive phase change material; thermal conductivity: 3 W/m*K; size: 25x20 mm; thickness: 0,5 mm; die-cut parts; colour: yellow
CONFIGURATIONS AVAILABLE • Standard sheet size: 400x300 mm • Custom die-cut shapes available • Available in different colours
STANDARD THICKNESSES • • • • • • • •
0,13 mm 0,20 mm 0,25 mm 0,30 mm 0,35 mm 0,40 mm 0,45 mm 0,50 mm
Modifications and errors excepted
March 2015
Micro Tech Components GmbH ● Hausener Straße 9 ● D-89407 Dillingen Phone: +49 9071 7945-0 ● Fax: +49 9071 7945-20 ● www.mtc.de ●
[email protected]
Page 2