Waterproof Light Fitting without Diffusers

---

Dustproof/Waterproof Light Fitting without Diffusers Series 175… Application: Humid, wet and dusty environments in industrial locations, workshops, car parks, cellars, kitchens etc. (Please contact us with regards to use where detergents and similar chemical materials are present!). Design: Housing: glass fibre reinforced polyester with inserted stud bolts. Gasket: temperature-proof, weather-resistant, non-ageing and chemical-resistant profile gasket. Electrical components: mounted inter-

nally on the hinged light fitting cover. Starters: easily accessible from outside. Dustproof/Waterproof lamp holder: with with turn contacts. Cable entries: variable, at the top and ends of the housing; 2 threaded blanking plug M20, looping of incoming mains cable at one side of the fitting is possible. Cable entries are pre-pressed. Connection: 3-pole terminal block. Mounting: closed „knock-outs“ for ceiling mounting, rubber gaskets and washers for sealing are inside the fitting.

Optionen:

– lamp holder support for fittings S.. – different cable entries up to M25x1.5 – through wiring system up to 5x2.5mm² max. (see “Through wiring systems) – turn-and engage reflector system (see accessories) – external reflectors (see accessories)

– for indoor installations with high ambient temperatures (versions 175... H..) – for connection to central battery systems (ZB) – emergency light fittings (see „Emergency Light Fittings”)

SCHUCH quality - Your advantage: • sturdy, extremely resilient and chemical resistant quality light fitting – thick wall glass fibre reinforced polyester enclosure – high stability due to moulded-in stud bolts with self sealing nuts • easy to install and maintain – starter easily accessible from outside – easily adaptable to all local structural conditions due to the variable cable entries; quick and economic single end IN-OUT wiring eliminates the classic through wiring • all-purpose due to large of number of variations and comprehensive accessories – with mirror finish reflector (turn-and-engage reflector system) for an economic solution where adjustable light direction is required – series 175...H for ambient temperatures up to +50°C/+60°C – series 175...S38/S50 with PC-protective tubes Ø 38mm and Ø 50mm with internal prism or integrated mirror reflector for adjustable light direction – series 175...SOT with hinged oval protective tubes and optimised mirror reflector with a high light coefficient (over 70%) as a simple solution for necessary or desired light direction

Additional cable entries (knock-outs)

175 1…

175 2…

IP65

175... Type

Article no.1)

T 26

Lamps W

Weight ca. kg 2)

with low loss conventional ballast

175 118 175 136 175 158 175 218 175 236 175 258 with electronic ballast 175 118 EVG 175 136 EVG 175 158 EVG 175 218 EVG 175 236 EVG 175 258 EVG

175 1...

175 2.. EVG

With cable entries for IN-OUT wiring as standard

17500 0001 17500 0004 17500 0007 17500 0010 17500 0013 17500 0016

1 x T 26/18 W 1 x T 26/36 W 1 x T 26/58 W 2 x T 26/18 W 2 x T 26/36 W 2 x T 26/58 W

1,2 1,8 2,3 1,3 2,5 3,5

17500 0019 17500 0020 17500 0021 17500 0022 17500 0023 17500 0024

1 x T 26/18 W 1 x T 26/36 W 1 x T 26/58 W 2 x T 26/18 W 2 x T 26/36 W 2 x T 26/58 W

0,8 1,4 1,6 1,0 1,6 1,7

1) Uncomp.; article nos. for comp. see price list 2) Weights without packing material

3) With extention ring 1681/38

The variable cable entries allows for an easy adaption to suit all local structural conditions, thus eliminating the classic through wiring with single end IN-OUT wiring. All cable entries are knock-outs.

Bitte beachten Subject to technical Sie die changes, Hinweise im misprints Technischen and errors. Anhang!

Technische Änderungen, Druckfehler und Irrtümer vorbehalten.

106

Produkt-Katalog 2014-15

Note: Application of VDE tested LED Retrofit lamps with short circuit starter only identified with VDE registration no. or with VDE symbol.

IP65

175... RLED for LED Retrofit Lamps with short-circuit starter Design: As standard version but: Starter: Delivery without jumper (belongs to delivery of the lamp).

Ingress protection: IP65 with adequate lamps. The fittings are suitable for retrofit lamps with an outer diameter of 26 mm (also at the end of the retrofit lamps). If retrofit-systems with tightened end sections or with enhanced diameters are used additional accessory 1681/38 and 170/26 is necessary (please see accessory / spare parts).

Waterproof lampholder: Special type with snap function. (see „Note“)

Advantages of the RLED-version: • specific light control by setting the beam direction in steps of 30° via the lampholder

• triple safety as to applications

– VDE certified system (short circuit starter) – VDE certified light fitting – VDE certified LED retrofit lamp

R LED

Type

Article no.

Lamps¹)

Weight Length (m) approx.kg

175 1/12 RLED 175 1/15 RLED 175 2/12 RLED 175 2/15 RLED

17503 0303 17503 0305 17503 0304 17503 0306

1 x LED-Retrofit 1 x LED-Retrofit 2 x LED-Retrofit 2 x LED-Retrofit

1,20 1,50 1,20 1,50

1,8 2,3 2,5 3,5

1) Application of LED lamps with VDE registration no. or with VDE symbol only!

IP65

175… S38

Application: Humid, wet and dusty environments with high risk of damage.

T 26 175 ... S38 175 1.. S38

175 2.. S38

Type

Article no.

Lamps W

Weight ca. kg 2)

175 118 S38 175 136 S38 175 158 S38 175 218 S38 175 236 S38 175 258 S38

17500 0096 1) 17500 0099 1) 17500 0102 1) 17500 0105 1) 17500 0108 1) 17500 0111 1)

1 x T 26/18 W 1 x T 26/36 W 1 x T 26/58 W 2 x T 26/18 W 2 x T 26/36 W 2 x T 26/58 W

1,4 2,0 2,6 1,6 2,9 4,3

175 118 S38 EVG 175 136 S38 EVG 175 158 S38 EVG 175 218 S38 EVG 175 236 S38 EVG 175 258 S38 EVG

17500 0149 17500 0150 17500 0151 17500 0152 17500 0153 17500 0154

1 x T 26/18 W 1 x T 26/36 W 1 x T 26/58 W 2 x T 26/18 W 2 x T 26/36 W 2 x T 26/58 W

1,0 1,7 2,0 1,3 2,2 2,4

IP65

175… S50 with clear PC protective tube with inner prisms Ø 50mm T 26 175 … S50

175 1.. S50

175 2.. S50

Type

Article no.

175 118 S50 175 136 S50 175 158 S50 175 218 S50 175 236 S50 175 258 S50

17500 01141) 17500 01171) 17500 01201) 17500 01231) 17500 01261) 17500 01291)

1 x T 26/18 W 1 x T 26/36 W 1 x T 26/58 W 2 x T 26/18 W 2 x T 26/36 W 2 x T 26/58 W

1,5 2,4 3,0 2,0 3,6 4,1

175 118 S50 EVG 175 136 S50 EVG 175 158 S50 EVG 175 218 S50 EVG 175 236 S50 EVG 175 258 S50 EVG

17500 0155 17500 0156 17500 0157 17500 0158 17500 0159 17500 0160

1 x T 26/18 W 1 x T 26/36 W 1 x T 26/58 W 2 x T 26/18 W 2 x T 26/36 W 2 x T 26/58 W

1,2 1,9 2,2 1,6 2,5 2,9

1) Uncomp.; article nos. for comp. see price list

Bitte beachten Subject to technical Sie die changes, Hinweise im misprints Technischen and errors. Anhang!

Technische Änderungen, Druckfehler und Irrtümer vorbehalten.

107

Lamps W3)

Weight ca. kg 2)

2) Weights without packing material

Produkt-Katalog 2014-15

Dustproof/Waterproof Feuchtraumleuchten Light Fittings

with clear PC protective tube Ø 38 mm

IP65

175… SOT

with clear PMMA or PC oval protective tube, internal prism, and mirror-type reflector Application: High rooms, aisles and corridors or wherever an adjustable and defined light direction is required e.g. workplace illuType

Article no.

T 26 175... SOT 175 1.. SOT

175 2.. SOT

mination at the assembly conveyers, control panels, loading platforms, subways, any special kind direct illumination etc. Lamps W

Weight ca. kg

with PMMA oval protective tube and low loss conventional ballast 175 118 SOT 17500 0451) 1 x T 26/18 W 175 136 SOT 17500 0454) 1 x T 26/36 W 17500 0457) 175 158 SOT 1 x T 26/58 W 2 x T 26/18 W 175 218 SOT 17500 0401) 175 236 SOT 17500 0404) 2 x T 26/36 W 17500 0407) 175 258 SOT 2 x T 26/58 W

1,6 2,5 3,5 2,2 4,0 5,5

with PC oval protective tube and low loss conventional ballast 175 118 SOT PC 17500 0461) 1 x T 26/18 W 175 136 SOT PC 17500 0464) 1 x T 26/36 W 175 158 SOT PC 17500 0467) 1 x T 26/58 W 17500 0411) 175 218 SOT PC 2 x T 26/18 W 175 236 SOT PC 17500 0414) 2 x T 26/36 W 175 258 SOT PC 17500 0417) 2 x T 26/58 W

1,7 2,5 3,4 2,2 4,0 6,6

with PMMA oval protective tube and electronic ballast 17500 0453 1 x T 26/18 W 175 118 SOT EVG 175 136 SOT EVG 17500 0456 1 x T 26/36 W 175 158 SOT EVG 17500 0459 1 x T 26/58 W 175 218 SOT EVG 17500 0403 2 x T 26/18 W 17500 0406 2 x T 26/36 W 175 236 SOT EVG 175 258 SOT EVG 17500 0409 2 x T 26/58 W

1,3 2,1 2,6 1,8 3,0 3,7

with PC oval protective tube and electronic ballast (EVG) 175 118 SOT PC EVG 17500 0463 1 x T 26/18 W 175 136 SOT PC EVG 17500 0466 1 x T 26/36 W 175 158 SOT PC EVG 17500 0469 1 x T 26/58 W 175 218 SOT PC EVG 17500 0413 2 x T 26/18 W 175 236 SOT PC EVG 17500 0416 2 x T 26/36 W 175 258 SOT PC EVG 17500 0419 2 x T 26/58 W

1,3 2,2 2,6 1,8 3,1 3,7

1) Uncomp.; article no. for comp. see price list

Bitte beachten Subject to technical Sie die changes, Hinweise im misprints Technischen and errors. Anhang!

Technische Änderungen, Druckfehler und Irrtümer vorbehalten.

108

Produkt-Katalog 2014-15

Aluminium polished mirror-type reflector S50 S for tube Ø 50mm

External reflector

Turn-and-engage mirror system

Protective guard

Pipe clamp R1 1/2” R2”

- Ø 48.3mm - Ø 60.3mm

Ceiling bracket 183 DS

Tip: See end of chapter “Dustproof/Waterproof lighting” light-band rails and through wiring.

Type Article no. Type Article no. PC spare protective tube with sleeve, without mounting rings for light fittings with protective tubes Ø 3 8 mm Ø 50 mm , with internal prism 17514 9000 175 018 S50 17514 9003 175 018 S38 175 036 S38 17514 9001 175 036 S50 17514 9004 175 058 S38 17514 9002 175 058 S50 17514 9005 Aluminium mirror-type reflector (S50 S) for fitting into protective tube Ø 50mm 170 018 S50 S 17000 0001 17000 0002 170 036 S50 S 170 058 S50 S 17000 0003 Spare oval protective tube with sleeves, internal mirror, without holder ring PMMA with internal prism PC with internal prism 17514 9012 175018 SOT PC 17514 9015 175 018 SOT 175 036 SOT 17514 9013 175036 SOT PC 17514 9016 17514 9014 175058 SOT PC 17514 9017 175 058 SOT ... until 2012 17514 9006 175018 SO PC 17514 9009 175 018 SO 175 036 SO 17514 9007 175036 SO PC 17514 9010 175 058 SO 17514 9008 175058 SO PC 17514 9011 Cable entries 2511 90063 9000 threaded blanking plug M20 2561 25610 9000 plastic cable gland M20 x 1.5 2560 25600 9000 plastic cable gland M25 x 1.5 Plug-in lamp holder with twin slot contacts, with ring 171/20 90058 9000 for 1 lamp Ø 26mm (175 1..) 90060 9001 171/21 for 1 lamp Ø 38mm (175 1..) 171/19 90059 9000 for 2 lamps Ø 26mm (175 2..) 90061 9000 171/18 for 2 lamps Ø 38mm (175 2..) Plug-in lamp holders with twin slot contacts, without ring 175/1681/1 90200 9006 for 175 1… S38 175/1682/1 90200 9007 for 175 2.. / 175 2.. S38 + S50 Plug-in lamp holder with rotary contacts, without ring 90200 9008 175 SOT for 175... SOT and 175 1.. S50 175/1681 90200 9001 for 175 1… S38 (manufactured until 2008) 175/1682 90200 9003 for 175 2.. / 175 2.. S38 + S50 (manufactured until 2008) Retaining clamp for plug-in lamp holder 174/716 90200 9004 for 175… S38 + S50 + SO Lamp holder rings FAR 26 90145 9000 for 175 ... Ø 26 1681/38 16810 0001 for 175 ... S38 and 175... SOT FAR 502 90182 9000 for 175 ... S50 170/26 90002 0001 universal sealing ring from Ø 38mm to Ø 26mm Miscellaneous spare parts STK 175 90139 9000 starter cap STF 175 90138 9000 starter holder External reflector Powder coated aluminium (white) for site assembly 175/18 17513 0001 175/36 17513 0002 175/58 17513 0003 Turn-and-engage mirror system Mirror-finish reflector for clip fastening on Ø 26 fluorescent tubes. With latching device for settings/steps of 15° 175/21 17512 0001 175/22 17512 0004 175/41 17512 0002 175/42 17512 0005 175/61 17512 0003 175/62 17512 0006 Converting kits (US) for site conversion from open-tube lighting to protected tube lighting with polycarbonate protective tube Ø 38mm with polycarbonate protective tube Ø 50mm S38 US 118 90188 0001 S50 US 118 90187 0001 S38 US 136 90188 0002 S50 US 136 90187 0002 S38 US 158 90188 0003 S50 US 158 90187 0003 S38 US 218 90188 0004 S50 US 218 90187 0004 S38 US 236 90188 0005 S50 US 236 90187 0005 S38 US 258 90188 0006 S50 US 258 90187 0006 Protective guard, powder coated for series 175 1… for series 175 2… SK 120 90004 0001 SK 220 90004 0004 SK 140 90004 0002 SK 240 90004 0005 SK 165 90004 0003 SK 265 90004 0006 Mounting accessories for ceiling mounting 183 S 90049 0002 stainless steel swing hook for chain suspension 183 DS 90095 0001 stainless steel bracket with screws M5 Pipe clamps 183 RO 112 P 90091 0002 1 1/2", stainless steel 183 RO 2 P 90092 0002 2", stainless steel Attention: Observe the fixing distance when mounting on boom with pipe clamps (boom length!)

Bitte beachten Subject to technical Sie die changes, Hinweise im misprints Technischen and errors. Anhang!

Technische Änderungen, Druckfehler und Irrtümer vorbehalten.

109

Produkt-Katalog 2014-15

Dustproof/Waterproof Feuchtraumleuchten Light Fittings

Accessories / Spare Parts for Series 174… /175…