wooden k-cup holder


[PDF]wooden k-cup holder - Rackcdn.comhttps://cc831cbd7a5a3a616f82-5093119187eb17284bcf20613cda98f7.ssl.cf1.rackcd...

0 downloads 133 Views 2MB Size

PLANS BY BOWER POWER

WOODEN K-CUP HOLDER

DIMENSIONS: 82" X 70" X 45" D I F F I C U LT Y L E V E L : E A S Y

TOOLS REQUIRED

18V ONE+™ Compact Drill/Driver Kit 18V ONE+™ 18GA CORDLESS BRAD NAILER 1 1/2 IN. CARBON HOLE SAW CORNER CAT SANDER 10 IN. TABLE SAW WITH STEEL STAND 18V ONE+™ PALM ROUTER

ADDITIONAL REQUIRED ITEMS WOOD GLUE BRAD NAILS

PURCHASE LIST: 12" PLYWOOD FINISH (optional)

PLANS BY BOWER POWER

PAG E :   2

ASSEMBLY:

1

CUT Cut your 1/2" plywood into two pieces. These should be 12"x14" and 12"x3". The smaller piece should have one long side cut at a 12 degree angle. NOTE - the larger board will have a margin that is larger on one end than the other.

PLANS BY BOWER POWER

PAG E :   3

2

MARK Mark your 12"x14" board with a grid to indicate the centers of your kcup holes. The first horizontal line is 1.5" from the top and four more lines are at 2.5" intervals. The first vertical line is 1.5" from the side and three more lines are at 3" intervals. The intersections where the lines meet is where the holes will be centered. Use your drill and 2.5" hole saw bit to drill half way through each marked spot.

PLANS BY BOWER POWER

PAG E :   4

3

FLIP Flip your board over and drill through the rest of the hole.

HELPFUL HINT Use a palm router to smooth out each hole edge.

PLANS BY BOWER POWER

PAG E :   5

4

SAND Sand all sides of both boards and stain/paint to your desired finish.

PLANS BY BOWER POWER

PAG E :   6

5

NAIL Using a brad nailer, attach the smaller board to the larger board. Note that the larger margin on the larger board should be at the bottom. The angled cut on the smaller board should be next to the larger board so that the face of the larger board should angle backwards.

PLANS BY BOWER POWER

PAG E :   7

6

LOAD Load up your new storage solution with a variety of k-cups and enjoy your favorite cup of coffee while admiring your work.

PLANS BY BOWER POWER

PAG E :   8