ZTT TH

---

Tel : Fax :

0044 (0)118 979 1238 0044 (0)118 979 1283

ACT ZTT Through Hole Resonators The ACT ZTT family of Ceramic Through Hole Resonators offers a cost effective solution to those applications for applications requiring a wide temperature range, together with accuracy.

Specification Part Type/ Number

Frequency Range MHz

Test IC

Vdd

ZTT RS ZTT WS ZTT MT** ZTT MX

Frequency accuracy @25°C (%) ±0.5 ±0.5 ±0.5

Stability over temp. range (-20 +85°C)(%) ±0.3 ±0.3 ±0.3

Aging over 10 years (%) ±0.3 ±0.3 ±0.3

Typical Internal Cap. (pF) C1 & C2♦ 15 30 22 30 15 5

6.00~12.00 TC4069UBP X 2 +5V 1.84~6.00 TC4069UBP X 2 +5V 6.00 ~ 13.00 TC4069UBP X 2 +5V 12.0 ~ 20.00 20.01 ~ 26.00 74HCU04 +5V ±0.5 ±0.3 ±0.3 x2 26.01 ~ 60.00## ZTTRS ** 3.00 ~6.00 TC4069UBP X 2 +5V ±0.5 ±0.3 ±0.3 Vibration mode: RS/WS=MG Thickness shear MT Thickness expander MX Thickness expander ( third overtone) ** ZTTRS Not recommended use ZTTWS , ZTT MT rarely used for 6~12MHz use ZTTRS # # Frequencies between 50.01 and 60 MHz specification may vary from above please enquire. ♦ Capacitors: Tolerance +/-20% standard. Values of capacitors may change. This would not be a problem for the majority of applications. If the circuit design is sensitive to distributive capacitance please enquire. Note MOQ 500 pieces, apart from development samples and thereafter quantities in multiples of 500 pieces

Type No. ZTT RS ZTT WS ZTT MT ZTT MX

Frequency MHz 3.00 ~6.00 1.84~6.00 6.00 ~ 13.00 12.00 ~ 13.00 13.01 ~ 60.00

H W D Dimensions mm (max) 5.5 6 3.1 5.5 9.5 4 10 10 5 12 10 5 10 10 5

P 2.5 ±0.2 2.5 ±0.3 2.5 ±0.3 2.5 ±0.3 2.5 ±0.3

L 3.5 ±0.5 # 5.0 ±0.1 5.0 ±0.1 5.0 ±0.1 5.0 ±0.1

A

0.5 ±0.1 0.5 ±0.1 0.5 ±0.1 0.5 ±0.1

B 0.48±0.05 dia 0.25 ±0.1 0.3 ±0.1 0.3 ±0.1 0.3 ±0.1

# 13.5mm min lead length option available.

Important note when using Ceramic resonators with microcontrollers Some resonator parameters vary considerably with frequency and physical construction/size . These differences are too great to be able to be practically shown in a data sheet.However, these parameters can be critical when the resonators are used with microcontrollers. Even if two different resonators appear to have the same specification the typical values of these critical parameters can be considerably different. When enquiring about resonators for use with micricontrollers it is important to supply the make and part number of the IC to be used and/or the list of recommended resonators, if this is given.

Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Package Type and Size In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice

ISO9001 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK

http://www.actcrystals.com Issue :17 C1r Date 20/02/2014

Example Part Number:

ACT CERAMIC RESONATORS- PART NUMBERING & COMMODITY CODE Standard ( Popular ) Specifications Highlighted

ZTTWS

**

ACT ZTT WS

ZTT WS ZTT RS ZTT MT ZTT MX

6.00

M

6.00

MHz

ZTTWS ZTTRS ZTTMT ZTTMX

Part

Freq MHz

ZTT WS 1.84 ~ 6.00 ZTT RS 3.00 ~ 10.00 ZTT MT 6.00 ~ 13.00 ZTT MX 12.0 ~ 60.00 NOTE 5

Others available (Note 3)

N 0.50%

TOLERANCE @25°C (+/-)

UNITS

MHz

-

M

2kHz 1kHz 0.50% 0.40% 0.30% 0.25% 0.70% Note 3

COMMODITY CODE 854160 00 00

* * FREQUENCY Use full frequency including decimal point.

D P N F C B G

C

L

PF

±0.3%, -25~+80°C

Loose

RoHS

STABILITY ±0.5%, -20~+80°C ±0.4%, -20~+80°C ±0.3%, -20~+80°C ±0.2%, -20~+80°C ±0.1%, -20~+80°C ±0.3%, -25~+85°C ±0.3%, -40~+70°C ±0.5%, -40~+85°C ±0.4%, -40~+85°C ±0.3%, -40~+85°C ±0.2%, -40~+85°C ±0.5%, -40~+105°C ±0.4%, -40~+105°C ±0.3%, -40~+105°C ±0.2%, -40~+105°C ±0.5%, -40~+125°C ±0.4%, -40~+125°C ±0.3%, -40~+125°C ±0.2%, -40~+125°C Note 3

A B C D E F G I J K L P Q R S V W X Y

Tape & Reel 2K AMMO Z 1K AMMO Y Loose* L * Note 4

Suffix PF = RoHS Comp'

It is important to suffix the above part number with the full frequency required to give a completed part number as illustrated below

Full Example Part Number

ZTTWS6.00MNCL- PF

6.00MHz

1)

Tighter Stabilities, tolerances, Output Loads and Operating Temperature Ranges may be available. As each of these specification parameters may impact on each other, it is not always possible to combine all options in one device. Therefore, if a specification not catered for above is required, please contact us directly for assistance.

2)

ACT are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested AQL requirements, non standard packaging or taping and reeling and custom marking. ( MOQ DEPENDENT ) Such devices would normally be allocated a custom specification ( An ACT ZTT WS device may have a part number such as : ZTTWS6.00-C1501-PF)

3)

Enquire if a stability and / or tolerance other than the standard(s) highligted in yellow is required.

4)

Note MOQ 500 pieces, apart from development samples and thereafter quantities in multiples of 500 pieces

5)

ZTT RS Not recommended for 3.00 ~6.00MHz use ZTT WS MG , ZTT MT rarely used for 6~12MHz use ZTT RS

ISO9001 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, United Kingdom http:www.actcrystals.com Issue :17 C1r Date 20/02/2014